Switching License Tips

2023.11.10

Just read and pass the exam! Skill confirmation (practical test) measures for switching foreign Driver's License

table of contents

Introduction
Practical implementation method for skill test (skill confirmation)
-How to get in and out of a car, driving posture, etc.
-Traffic classification
-Driving according to traffic lights and signs
-How to check safety when changing course (most important!)
- Lateral passage of obstacles (most important!)
-How to turn right
-How to turn left
-Priority judgment
-Cancelled action items in skill confirmation
Thorough explanation of the details of demerit points for skill confirmation (practical test) for changing to Gaimen!
Finally

Introduction

I want to switch (change) my foreign Driver's License to a Japanese Driver's License, but I'm worried because I have no experience driving in Japan. No matter how many times I try, I fail the skill test (practical test)... For those of you who have such troubles!

The most difficult part of converting the foreign Driver's License to a Japanese one is the skill confirmation. In fact, there are many people who fail the exam many times and end up going to a driving school and getting their license from scratch. However, driving technique is not required in the actual test. You will be checked to see if you understand Japanese traffic rules and are aware of the important points for safe driving. In other words, if you firmly understand these rules and points, passing the exam on the next try is no longer a dream.

In this article, we will thoroughly explain and cover all nine points and deductible points for skill confirmation when converting foreign Driver's License to a Japanese one.

Practical implementation method for skill test (skill confirmation)

The exam is based on a deduction method with a maximum score of 100 points. Pass the exam with a score of 70 or higher.

Total distance traveled (meters) It's roughly 1,200 meters.

The challenges for standard vehicle, semi-medium-sized, medium-sized, and large vehicle licenses are as follows.

1. Running on the main course and the circular course

1) Traveling on a straight section

② Stopping at designated places

2. Crossing the intersection (passing the traffic light)

3. Driving on a curved course

4. Driving on a curved course

5. Passing through obstacle-placed areas

The testing center is large, but the practical test course is fixed. I think that if you can do image training, you can dispel your anxiety.

Let's take a look at nine points about basic driving one by one.

How to get in and out of a car, driving posture, etc.

① Able to get in and out of a car properly
[Getting in] Check the back of the car → Go around from the passenger side to the front and check the front of the car → Go to the driver's seat → Make sure you are not blocking traffic coming from behind, and if there are no problems, get in quickly → Stop the door once just before closing it, and then close it.
　　　
[Getting out] Apply the parking brake, put the gear in P, and turn off the engine → Unbuckle your seat belt and push your seat all the way back → Check that it is safe behind you, open the door slightly, and let traffic behind you know that you are opening the door.

② You can maintain a correct driving posture.
・Sit deeply
-Adjust the driver's seat forward and backward
・The upper body is placed on the handlebars
・Adjust the rearview mirror without moving your face as much as possible.
・Be careful not to twist your seat belt
　　　
Make sure the gear lever is in the "P" position, then adjust the side mirrors.

Traffic classification

① Drive on the left side of the center of the road.

② If there are two lanes going in the same direction, use the left lane.

Keep in mind that driving on the right side of the road will result in driving in the wrong direction, and your test will end immediately. Even if the test site is large, make sure you don't make the wrong decision about which side to drive on.

Driving according to traffic lights and signs

① If there is a stop sign or a flashing red light, you must stop before the stop line.
To be precise, it is within 2m from the stop line.
　　If you do not stop it once, failure to do so will result in immediate termination of the test!! 　

② After stopping for a while, check that both sides are safe so as not to obstruct the progress of vehicles passing on the intersecting road, and then start moving.

③ If the light is red, be sure to stop just before the stop line.

How to check safety when changing course (most important!)

1. Check behind you in the rearview mirror and signal approximately 3 seconds before changing lanes.
② Make sure there are no oncoming vehicles and check the safety on the right side using your rearview mirror and with your own eyes before changing lanes.

Here are the correct steps for changing course. Make sure you memorize these five steps.

1. Check behind you with the rearview mirror
2. Check the side mirrors of the direction you are changing to
3. Turn on your turn signal in the direction you want to change course (3 seconds)
4. Check behind you again in the rearview mirror, look in the side mirrors, and look directly*.
5. Face forward and steer

*Visual inspection = looking directly at a blind spot with your own eyes

Side passing of obstacles (most important!)

① When changing lanes, make sure it is safe ahead and that no vehicles are approaching from behind.
(Course change 4.)
② When crossing the center line to change lanes, be careful of oncoming vehicles.

[How to avoid obstacles correctly]
- The side with the obstacle ahead of it will wait.
- Maintain a distance of at least 1m, and avoid crossing the center line.
- When avoiding obstacles and returning to your original position, you must confirm and signal your intention to change course.
(Course change 4.)

Example of failure: Interfering with oncoming vehicles → The test will be canceled immediately.

Drive completely in the oncoming lane → keep to the right and the test ends immediately.

How to turn right

1. Check the safety of the right side with your own eyes and the rearview mirror (room mirror, right door mirror,
Visually check to the right), signal, and then move to the center of the road in advance (changing lanes 4.)
2. Turn right while driving slowly just inside the center of the intersection so as not to impede oncoming traffic.
3. Keep to the left after turning right

How to turn left

1. Check the safety of the left side with your own eyes and the rearview mirror (room mirror, left door mirror,
Visually check to the left), give a signal, and then move to the left edge of the road in advance (change of course 4.)
2. Slow down, check for traffic and safety on both sides, then make a tight left turn.

Priority judgment

If two vehicles attempt to enter an intersection with the same width but no traffic control at the same time, vehicles approaching from the left will have priority. In that case, yield to the vehicle coming from the left.

[The road ahead is the priority road]. The intersection where the center line extends into the intersection is the priority road.

[Turn right] case. Even if you enter the intersection first, you must not obstruct oncoming vehicles going straight or turning left.

Canceled action items during skill confirmation

・ Keep to the right
When driving or attempting to drive on the right side of the center of the road

・ Ignoring traffic lights
1. When a red light is displayed and any part of the vehicle exceeds or is about to exceed the legally required stopping position.
② When a yellow light is displayed and part of the vehicle exceeds or attempts to exceed the stopping point even though it is safe to stop.

・ Suspended
　道路標識等による一時停止の指定場所で、停止線（停止線のない場合は交差点の直前）の手前で停止しない場合

・ Veering off course
　試験管の指示に従わずコースから逸脱した場合

・ Contact with an obstacle
　①場内コースに設置してある障害物等（ポール・カラーコン）に、車体（二輪車では運転者の身体も含む）が強く接触したとき、または軽く接触した後にそのまま走行を継続したときや、継続しようとしたとき
② When there is a risk of the vehicle coming into contact with pedestrians, vehicles, buildings, etc.

・ If the examiner operates the brakes or steering
　運転操作が確実でなく、道路や周囲の交通、試験車の状況等に応じた他人に迷惑をかけないような速度および方法で運転しないため、他人に迷惑をかけそうな場合で試験管がハンドルやブレーキ、その他の操作を補助したとき、または是正措置を指示したとき

Thorough explanation of the details of demerit points for skill confirmation (practical test) for changing to Gaimen!

[10 points deduction details] Points to be especially careful about

1. Retrograde (small)	If you go against the direction you are trying to travel
2. Maintaining speed (outside of the task)	If the required speed cannot be achieved due to slow acceleration, etc.
3. Safety unconfirmed	Although the driver stopped temporarily or slowed down, the driver failed to check the safety of the vehicle sufficiently, causing the driver to overlook the vehicle or be delayed in finding the other party.
4. Too fast (small)	If the speed is faster than the speed appropriate for the road and traffic conditions (excluding when there is an obligation to slow down)
5. Sudden steering wheel	Changing the direction of travel by suddenly operating the steering wheel.
6. Light-headedness (small)	If the steering wheel is unstable and unsteady
7. Curvilinear balance/refraction balance	You can safely balance your ride with the crank and S-curve.
8. Violation of prohibition on changing course	If you change your course unnecessarily (meaninglessly)
9. Violation of traffic classification by direction of travel	When a traffic classification regarding the direction of travel is specified at an intersection, when the vehicle does not pass according to the designated classification, or when the vehicle does not intend to pass.
10. Poor prioritization	- When you make a vehicle approaching from the left at an intersection without traffic lights slow down or stop. - At an intersection without traffic lights, when the intersecting road has priority, and vehicles traveling on the priority road are forced to slow down or stop. - At an intersection without traffic lights, when vehicles traveling on an intersecting road that is clearly wider than the road the test vehicle is traveling on are forced to slow down or stop. When turning right at an intersection, causing oncoming vehicles to slow down or stop When starting from a place designated as a stop sign by a road sign, etc., causing vehicles traveling on an intersecting road to slow down or stop, etc.
11. Violation of restrictions on the use of horns, etc.	・When the horn is sounded without due consideration (irrationally) - When the horn is not sounded in a place designated by road signs, etc.
12. Violation of sudden braking prohibition	This is a violation of intentionally applying sudden brakes to slow down or stop suddenly, rather than to avoid an accident.
13. Not maintaining following distance	When you catch up to a stopped vehicle (waiting at a traffic light, etc.) and stop, you do not maintain or attempt to maintain a distance of approximately 1.5m or more between you and the vehicle in front.
14. Alarm
15. Mud splash driving	When driving through mud or puddles, the vehicle splashes mud or muddy water and causes or is likely to cause a nuisance to others.

[5 points deduction details] Points to be especially careful about

1. Failure to signal, etc. (change of course)	The signal for a change of course must be given approximately 3 seconds before the change of course and must continue until the change of course is completed.
2. Failure to signal (right/left turn)	When making a right or left turn at an intersection, etc., start flashing your turn signal 30 meters before the turning point, and keep the turn signal flashing until you complete the turn.
3. Inappropriate measures to prevent entanglement	- When a vehicle turns left or enters a roundabout and does not take measures to prevent being hit - When there is a motorcycle immediately before an intersection in the direction of travel, or when traveling alongside a motorcycle, you do not allow the motorcycle to go ahead or proceed ahead.
4. Traffic lane violation	When you drive or attempt to pass in the right-most vehicle lane in a lane where no traffic classification is specified.
5. Route change violation (narrow road)	・When turning left onto a narrow road (such as a curve or S-shaped road), failing to change lanes to the left in advance (from about 30m) ・When you change lanes to the left but are more than 1m away from the left edge of the road ・When you have completed the left lane change within approximately 30m of the entrance to a narrow course - When the vehicle is turned to the right just before the entrance to a narrow course
6. Route change violation (intersection)	Vehicles behind the intersection are prohibited from overtaking or overtaking the vehicle in front of them at an intersection or within 30 meters before the intersection.
7. Violation of right/left turn method	It is a violation of the rules that cars must follow when turning right or left at an intersection. Before entering an intersection, when turning left, you must move your vehicle as close to the left as possible, and when turning right, you must move your vehicle as close to the center as possible (or to the right if it is a one-way street). Failure to follow this rule will be a violation of the intersection right/left turn method.
8. Cut back (excluding narrow road course)	If you turn back due to poor operation or poor judgment

Finally

What do you think? If you have a good understanding of Japan's traffic rules and drive considerately, you can aim to pass the driving skills test (driving skills confirmation)!

This video explains in more detail with diagrams and actual driving footage. If you are interested, click here☟

Japanese version: https://vimeo.com/ondemand/jpsamuraidriverziplus　

English version: https://vimeo.com/ondemand/ensamuraidriverziplus

Chinesehttps://vimeo.com/ondemand/zhsamuraidriverziplus

Vietnamesehttps: //vimeo.com/ondemand/visamuraidriver